If you are interested in learning more about asphalt sealcoating, you should consider the steps for sealing your own driveway at home. Your driveway can be made to look new with a proper cleaning if the area first and proper appliance of the asphalt sealcoating. All the dirt and weeds that have built up in your driveway should be removed for a proper seal job, and to ensure no cracks or bubbles form when drying.
If it is necessary, you should power wash the driveway because you want to be the driveway as clean as you can for the asphalt to bond to the surface. Once the driveway is clean and dry, you can begin to fill the cracks of the driveway, with a tool you can buy from a local hardware store. If you have old rubber boots or sneakers that you don’t mind getting dirty, you should wear them, in case sealer gets onto your shoes. Once the sealer is completely spread out onto the driveway smoothly, it should be finished off with a cotton brush and left to dry for a few days. If you need some advice, don’t hesitate to contact a local sealing contractor for assistance.